Section 20 Calculator: Work Out Your Share of Major Works

Quick answer: use this free Section 20 calculator to estimate what you will pay. Your Section 20 contribution is usually your share of the building (the percentage in your lease, or an equal split between flats) multiplied by the total cost of the works, plus professional fees and VAT. If any leaseholder would pay more than £250, the landlord must consult leaseholders under Section 20 before the works start.

Section 20 major works on a London block of flats: external restoration by Block Restoration

Free Section 20 calculator

Estimated contribution for your flat
£0
Get the works priced properly

This is a guide only. Your actual share is set by your lease and the final account for the works. If anything looks wrong, check your lease or speak to your managing agent.

How the Section 20 calculation works

Most leases set out what share of the building’s costs each flat pays. Some use a fixed percentage, some use floor area or rateable value, and some split costs equally. The total you’re charged normally includes the contractor’s price, the surveyor’s or contract administrator’s fees, the managing agent’s fee and VAT.

What pushes the cost of major works up

  • Scaffolding, especially on taller blocks or tight London streets
  • Defects found once the scaffold is up, such as failed render, cracked masonry or rotten sash windows
  • Conservation area requirements, like lime mortar or matching original details
  • Works that are poorly specified at the start, which leads to variations later

How to keep your contribution down

The biggest saving comes from a proper survey before the works are specified. Block Restoration works alongside independent RICS surveyors, so the survey, specification and repairs are joined up from the start. That means fewer surprises once the scaffold is up. Read why a building survey should come before any major works.

Need the works priced?

We carry out external refurbishment, masonry repairs, crack stitching, decorating and sash window work for managing agents, freeholders and residents’ associations across London. Get in touch for a site visit and a clear, itemised price.

Frequently asked questions

How is my Section 20 contribution calculated?

Your share is set by your lease. It is usually a fixed percentage, or the cost split equally between flats, applied to the total cost of the works including professional fees and VAT. The Section 20 calculator above uses the same method.

When does Section 20 consultation apply?

If any one leaseholder would pay more than £250 towards a set of qualifying works, the landlord must consult leaseholders under Section 20 of the Landlord and Tenant Act 1985 before the works go ahead.

Can I challenge a Section 20 charge?

Yes. If you think the charge is unreasonable, or the consultation was not done properly, you can apply to the First-tier Tribunal (Property Chamber). The Leasehold Advisory Service gives free initial advice.

Is the Section 20 calculator accurate?

It gives a guide figure. Your final bill depends on your lease and the final account for the works, which can be higher or lower than the estimate in the notice.

Want to understand the process first? Read our guide: Section 20 notices explained.

Copyright © 2026 Block Restoration | All rights reserved | Designed & SEO by SETH Strategy

Call Now
Get a Quote